Sun Microsystems Netra ct, Руководство по установке

Страница: 69 / 174

Chapter 5 Installing Additional Cards into the Netra ct Server 51
FIGURE 5-9
Buses for the Netra ct 400 Server (Rear View)
▼
To Install a Front I/O Card and I/O Rear
Transition Card
1. Verify that you’ve taken the necessary antistatic precautions.
Refer to “To Attach the Antistatic Wrist Strap” on page 42 for those instructions.
2. Locate the I/O slot where you will be installing the front I/O and I/O rear
transition cards.
■
FIGURE 5-2
shows the I/O card slots in a Netra ct 800 server.
■
FIGURE 5-4
shows the I/O card slots in a Netra ct 400 server.
3. Remove the slot filler panel, if necessary.
The slot filler panel is secured to the card cage using two screws, one at the top of
the filler panel, the other at the bottom.
4. Get the I/O rear transition card from the ship kit.
1 2 3 4 5
H.110
bus
P5 P5 P5 P5 P5
P4 P4 P4 P4 P4
P3 P3 P3 P3 P3
P2 P2 P2 P2 P2
P1 P1 P1 P1 P1
cPCI bus 32-bit@33 MHz
cPCI bus 64-bit ext.