Suitmate Swimsuit Water Extractor Скачать руководство пользователя страница 69

Страница: 69 / 72

April 13, 2009

115-V 20-Amp 60-Hz Self-Timed Unit

SUITMATE

Extractor Corporation

685 Martin Drive

Post Office Box 99

South Elgin, IL 60177

(847) 742-3532

(800) 553-3353

Fax: (847) 742-3552

WARRANTY

Extractor Corporation (“EC”) warrants to the purchaser of their manufactured

equipment that for one (1) year after the purchase the equipment shall be free from

any defects in workmanship.

Purchaser agrees that as a pre-condition to any EC liability hereunder, purchaser shall

fully inspect all goods immediately upon delivery to purchaser and shall give EC

written notice of any claim or purported defect within ten (10) days after discovery of

such defect. As a further pre-condition to any EC liability to any EC liability hereunder,

purchaser shall return said purportedly defective equipment, freight prepaid, to the

plant of the manufacturer. EC shall inspect all returned equipment, and, if said

equipment is found defective, shall, at its option as purchase’s sole and exclusive

remedy, repair or replace such equipment or any defective component or part thereof

which proves to be defective, or refund the net purchase price paid by the original

purchaser. Alterations or repairs by others or operation of such equipment in a

manner inconsistent with EC accepted practices and all operating instructions shall

void this warranty. EC shall not be for defects caused by the effects of normal wear

and tear, erosion, fire or explosion.

EC’s sole and exclusive liability under this warranty is to the original purchaser and

shall not exceed the lesser of the cost of repair, cost of replacement, or refund of net

purchase price paid by the original purchaser. EC is not liable for any other losses,

damages, or costs of delays, including incidental or consequential damages. EC

SPECIFICALLY MAKES NO WARRANTIES OR GUARANTEES, EXPRESSED OR

IMPLIED, INCLUDING THE WARRANTIES OR MERCHANTABILITY OR FIT-NESS

FOR A PARTICULAR PURPOSE OR USE, OTHER THAN OR WHICH EXTEND

THOSE WARRANTIES EXPRESSED HEREIN.

WWW.RESTROOMDIRECT.COM 704•937•2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115

Содержание Swimsuit Water Extractor









































































Результаты поиска

Содержание Swimsuit Water Extractor

Отзывы:

Бренды по названию

Популярные бренды

Suitmate Swimsuit Water Extractor, Инструкция по установке и обслуживанию

Результаты поиска

Содержание Swimsuit Water Extractor

Отзывы:

Бренды по названию

Популярные бренды