Suitmate Swimsuit Water Extractor, Инструкция по установке и обслуживанию

Страница: 41 / 72

April 13, 2009 115-V 20-Amp 60-Hz Self-Timed Unit
39
REMOVE AND REPLACE SHOCK MOUNTS
Do this FIRST
Make certain you have all the correct parts and fasteners necessary for correct installation. Re-use any
components that are not damaged, otherwise replace them. Parts used in this process: (3) AEC1202 Shock
Mounts, (3) AEC1224 S.S. Nuts. Plus any components required to properly reinstall the Drive Unit Assembly
(Page 27) and the Sub-Top and Top Assemblies (Page 19).
REMOVE SHOCK MOUNTS
1) Remove SUITMATE
®
unit from the Wall Mount Bracket. See instructions beginning on Page 17.
2) Remove Top and Sub-Top Assemblies. See instructions beginning on Page 19.
3) Remove Drive Unit Assembly. See instructions beginning on Page 27.
4) Remove the S.S. Nut that secures the Shock Mount to the Shock Bumper Ring.
5) Remove the Shock Mount from the Shock Bumper Ring.
REPLACE SHOCK MOUNTS
1) Install the new Shock Mount to the Shock Bumper Ring and secure using the S.S. Nut.
Note: Use new S.S. Nuts if necessary.
2) Reinstall Drive Unit Assembly. See instructions beginning on Page 27.
3) Reinstall Sub-Top and Top Assemblies. See instructions beginning on Page 19.
4) Reinstall SUITMATE
®
unit to the Wall Mount Bracket. See instructions beginning on Page 18.
5) Retest the SUITMATE
®
unit for proper operation, refer to TESTING AND OPERATION on Page 8.
WWW.RESTROOMDIRECT.COM 704•937•2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115