Suitmate Swimsuit Water Extractor, Инструкция по установке и обслуживанию

Страница: 13 / 72

April 13, 2009 115-V 20-Amp 60-Hz Self-Timed Unit
11
UTILITIES LOCATION DIAGRAM
115-V 20-Amp 60-Hz Self-Timed Unit
WARNING!
This diagram is for reference only! It is not to be used as the sole reference
for installation of the SUITMATE
®
unit. The installation instructions beginning
on page 4 must be followed explicitly!
1) On wall locate center of 3/8” (9.5mm) hole for the upper center hole of the Wall Mount Bracket.
2) Draw a vertical line (down) from this mark to indicate the center of the lower mounting channel of the
SUITMATE
®
unit.
3) Use given measurements to locate either or both locations for placement of internal utilities.
4) After the SUITMATE
®
unit is hooked over the upper bracket, move it side to side so the center hole in the
bottom channel is over the vertical line drawn in Step 2.
Suggested location
for Internal
Connections of
Customer's
Power Source
upper center hole of
Wall Mount Bracket
The upper center
hole of the Wall
Mount Bracket
has to be located
38 +/- inches
[965 +/- 2 mm]
above the floor.
Centerline of 3 8 " hole locating
Top of Wall
Sign is
located 60
[1534 +/- 2
mm] above
Floor and
centered
over
the (open)
Lid as
shown.
+/-116 inches
3
8 " [9.5] diameter hole
used to locate the
upper center hole of
the Wall Mount Bracket
Suggested location for
Internal Connection to
Customers' Waste Drain
3 5
16 [84]
1 [25]
Floor
11 [279]
3 [76]
1058 [270]
312 [89]
7 [178]
4 [102]
WWW.RESTROOMDIRECT.COM 704•937•2673 129 Oakpark Dr., Unit A, Mooresville, NC 28115