Subaru WRX 2018, Руководство пользователя

Страница: 145 / 572

!
Switching power status
Power
status
Indicator color Operation
OFF OFF
Power is turned
off.
ACC Orange
You can use the
audio and ac-
cessory power
outlet.
ON
Orange (while
the engine is
stopped)
You can use all
electrical sys-
tems.
OFF (during en-
gine operation)
The power will be switched every time you
press the push-button ignition switch.
1. Carry the access key fob, and sit in the
driver
’
s seat.
2. Shift the shift lever in neutral (MT
models) or the select lever in the
“
P
”
position (CVT models).
3. Press the push-button ignition switch
without depressing the clutch pedal (MT
models) or the brake pedal (CVT models).
The power will be switched in the se-
quence of
“
OFF
”
,
“
ACC
”
,
“
ON
”
and
“
OFF
”
.
When the engine is stopped and the push-
button ignition switch is in
“
ACC
”
or
“
ON
”
,
the operation indicator on the push-button
ignition switch illuminates in orange.
CAUTION
.
To avoid a malfunction, observe
the following precautions.
–
Do not spill drinks or other
liquids on the push-button
ignition switch.
–
Do not touch the push-button
ignition switch with a hand
that is soiled with oil or other
contaminants.
.
If the push-button ignition switch
does not operate smoothly, stop
t h e
o p e r a t i o n . C o n t a c t a
SUBARU dealer immediately.
.
If the push-button ignition switch
does not illuminate even when
the instrument panel illumination
is on, have the vehicle inspected
at a SUBARU dealer.
.
If the vehicle was exposed to
sunlight for a long time, the sur-
face of the push-button ignition
switch may get hot. Be careful
not to burn yourself.
NOTE
.
When operating the push-button
ignition switch, firmly press it.
.
If you press the push-button ignition
switch quickly, the power may not turn
on or off.
.
If the indicator light on the push-
button ignition switch flashes in green
when pressing the push-button ignition
switch, steering is locked. When this
occurs, press the push-button ignition
switch while turning the steering wheel
left and right.
!
Battery drainage prevention
function
When the push-button ignition switch is
left in the
“
ACC
”
or
“
ON
”
position for
approximately 1 hour, the push-button
ignition switch will be automatically
switched to
“
OFF
”
to prevent the battery
from going dead. (In CVT models, this
function is activated when the select lever
is in the
“
P
”
position.)
!
When access key fob does not
operate properly
Refer to
“
Access key fob
–
if access key
fob does not operate properly
” F
9-17.
Instruments and controls/Ignition switch
3-7