Subaru WRX 2018, Руководство пользователя

Страница: 181 / 572

!
Screen Settings
After entering the
“
Screen Settings
”
menu,
select one of the following menus.
!
Welcome Good-bye Screen
The welcome screen/good-bye screens
can be activated or deactivated. Select
“
On
”
to activate the screens. Select
“
Off
”
to deactivate the screens.
!
Gauge Initial Movement
The movement of the meter needles and
gauge needles that occurs when the
ignition switch is turned to the
“
ON
”
position can be activated or deactivated.
Select
“
On
”
to activate. Select
“
Off
”
to
deactivate.
!
Gear Position Indicator Setting
(MT models)
Display of the shift position indicator can
be activated or deactivated. Select
“
On
”
to
activate display of the shift position in-
dicator or
“
Off
”
to deactivate it.
!
Languages
Operate the
“ ”
or
“ ”
switch on the
steering wheel to display the preferred
language. Then pull the
“
/SET
”
switch to
select the displayed language.
!
SRH (if equipped)
Select
“
On
”
to activate the Steering
Responsive Headlight (SRH). Select
“
Off
”
to deactivate the SRH.
!
REV settings (STI)
NOTE
If the setting of the REV Indicator Light
is
“
Off
”
, the setting menus of the REV
Alarm Level Engine Speed and the REV
Buzzer are not displayed.
After entering the
“
REV settings
”
menu,
select any of the following menus.
!
REV Indicator Light
Display of the REV indicator light can be
activated or deactivated. Select
“
On
”
to
activate display of the REV indicator light
or
“
Off
”
to deactivate it.
!
REV Alarm Level Engine Speed
The alarm-level engine speed can be set
(in 100 rpm steps) within the range from
2,000 rpm to the red zone.
!
REV Buzzer
The REV buzzer can be activated or
deactivated. Select
“
On
”
to activate the
REV buzzer or
“
Off
”
to deactivate it.
!
EyeSight (models with the EyeSight
system)
NOTE
Refer to the Owner
’
s Manual supple-
ment for the EyeSight system.
!
BSD/RCTA (if equipped)
After entering the
“
BSD/RCTA
”
menu,
select the
“
Warning Volume
”
menu. You
can set the volume of the warning buzzer
for RCTA (Rear Cross Traffic Alert). You
can select
“
Max
”
,
“
Mid
”
,
“
Min
”
or
“
Off
”
.
!
RAB (models with the EyeSight
system)
After entering the
“
RAB
”
menu, select one
of the following menus.
NOTE
For details about the Reverse Auto-
matic Braking system, refer to
“
Re-
verse Automatic Braking System
” F
7-
66.
!
Warning Volume
The volume of the warning sound that is
activated when the Reverse Automatic
Braking system is in operation can be set
in 3 stages (
“
Max
”
,
“
Mid
”
and
“
Min
”
).
Instruments and controls/Combination meter display (color LCD)
–
CONTINUED
–
3-43