Subaru WRX 2018, Руководство пользователя

Страница: 151 / 572

Warning and indicator lights
Several of the warning and indicator lights
illuminate when you initially turn the
ignition switch to the
“
ON
”
position. This
permits checking the operation of the
bulbs.
Apply the parking brake and turn the
ignition switch to the
“
ON
”
position. For
the system check, the following lights
illuminate and then turn off after several
seconds or after the engine has started.
: Seatbelt warning light
(The seatbelt warning light turns off
only when the driver fastens the
seatbelt.)
: Front passenger
’
s seatbelt warning
light
(The seatbelt warning light turns off
only when the front seat passenger
fastens the seatbelt.)
: SRS airbag system warning light
ON / : Front passenger
’
s frontal airbag
ON indicator light
/ : Front passenger
’
s frontal airbag
OFF indicator light
: CHECK ENGINE warning light/Mal-
function indicator light
: Charge warning light
: Oil pressure warning light
: REV indicator light (STI)
: AT OIL TEMP warning light
(CVT models)
: Rear differential oil temperature warn-
ing light (STI)
: Low tire pressure warning light
(U.S.-spec. models)
/ : ABS warning light
/ : Brake system warning light
: Electronic parking brake indicator
light (models with the electronic
parking brake system)
: Low fuel warning light
: Hill start assist warning light/Hill start
assist OFF indicator light (models
without electronic parking brake sys-
tem)
: Door open warning light
: AWD warning light (if equipped)
: Power steering warning light (except
STI)
: Vehicle Dynamics Control warning
light/Vehicle Dynamics Control opera-
tion indicator light
: Vehicle Dynamics Control OFF indica-
tor light
: LED headlight warning light (if
equipped)
: Headlight indicator light
: Automatic headlight beam leveler
warning light (if equipped)
: Traction mode indicator light
If any lights fail to illuminate, it indicates a
burned-out bulb or a malfunction of the
corresponding system.
Consult your authorized SUBARU dealer
for repair.
&
Seatbelt warning light
and chime
Your vehicle is equipped with a seatbelt
warning device at the driver
’
s and front
passenger
’
s seat, as required by current
safety standards.
With the ignition switch turned to the
“
ON
”
position, this device reminds the driver
and front passenger to fasten their seat-
belts by illuminating the warning lights in
the locations indicated in the following
illustration and sounding a chime.
Instruments and controls/Warning and indicator lights
–
CONTINUED
–
3-13