Subaru WRX 2018, Руководство пользователя

Страница: 171 / 572

&
Security indicator light
This indicator light shows the status of the
alarm system. It also indicates operation
of the immobilizer system.
!
Alarm system
It blinks to show the driver the operational
status of the alarm system. For detailed
information, refer to
“
Alarm system
” F
2-
25.
!
Immobilizer system
The security indicator light starts blinking
in the following conditions.
For models with
“
keyless access with
push-button start system
”
:
.
Immediately after turning the push-
button ignition switch to the
“
OFF
”
posi-
tion.
.
Immediately after opening or closing
the driver
’
s door when all of the following
conditions are met.
–
The push-button ignition switch is in
the
“
ON
”
or
“
ACC
”
position.
–
The access key fob is outside the
vehicle.
–
The engine is not running.
–
In the event that an unauthorized
key is used (for example, the key is
unregistered or the ID code does not
match), the power is not switched to
“
ON
”
and the security indicator light
continues blinking.
For models without
“
keyless access
with push-button start system
”
:
.
Approximately 60 seconds after turning
the ignition switch from the
“
ON
”
position
to the
“
ACC
”
or
“
LOCK
”
position.
.
Immediately after pulling out the key.
If the indicator light does not blink in the
above conditions, it may indicate that
immobilizer system may be malfunction-
ing. Contact your nearest SUBARU dealer
immediately.
In the event that an unauthorized key (for
example, an unauthorized duplicate) is
used, the security indicator light illumi-
nates. For details about the immobilizer
system, refer to
“
Immobilizer
” F
2-23.
NOTE
.
The security indicator light remains
off in the following conditions. It means
that the matching of the ID code is
completed and the immobilizer system
is deactivated, and it does not indicate
a malfunction.
Models with
“
keyless access with
push-button start system
”
:
–
while the engine is running
–
the push-button ignition switch
has been turned to the
“
ON
”
or
“
ACC
”
position and the driver
’
s
door has not been opened or closed
Models without
“
keyless access
with push-button start system
”
:
–
while the engine is running
–
for approximately 60 seconds
after the ignition switch is turned
from the
“
ON
”
position to the
“
ACC
”
or
“
LOCK
”
position
–
when the ignition switch is in the
“
ON
”
position.
.
Even if a malfunction occurs, such
as the security indicator light flashes
irregularly, it will not affect the func-
tionality of the immobilizer system.
Instruments and controls/Warning and indicator lights
–
CONTINUED
–
3-33