Subaru WRX 2018, Руководство пользователя

Страница: 420 / 572

Starting and operating/Reverse Automatic Braking System
tem is set to on
.
The select lever is in the
“
R
”
position
.
The vehicle speed is between 1 to 9
mph (1.5 to 15 km/h)
NOTE
.
When the Reverse Automatic Brak-
ing fail indicator is illuminated, the
Reverse Automatic Braking system
cannot be operated. Promptly contact
a SUBARU dealer to have the system
inspected.
.
When the Reverse Automatic Brak-
ing system OFF indicator is illumi-
nated, the Reverse Automatic Braking
system cannot be operated.
.
In the following cases, the system
may not be able to properly detect an
obstacle. Promptly contact a SUBARU
dealer to have the system inspected.
–
A sticker, paint, or a chemical is
applied to the rear bumper near the
sonar sensor
–
The rear bumper is modified
–
The rear bumper has been re-
moved and reattached
–
The ground clearance is changed
due to the vehicle
’
s loading condi-
tion or modification
–
Ice, snow or mud is adhered to
the rear bumper near the sonar
sensor
–
The rear bumper is exposed to
strong impact, or the rear bumper is
deformed
.
On a steep hill, the system
’
s auto-
matic braking ability will be reduced.
.
The system is designed to avoid
collisions by automatic hard braking
when the vehicle
’
s reversing speed is
less than approximately 3 mph (5
km/h). However, the system does not
guarantee that the vehicle will be able
to avoid collisions in any situation.
.
If the vehicle is reversed at an
extremely slow speed, the driver
’
s
operation may be prioritized. In this
case, automatic braking will not oper-
ate.
.
The system may not be able to
detect the following objects
–
Sharp or thin objects such as
poles, fences and ropes which may
not reflect the sound wave emitted
from the sonar sensor
–
Objects that are too close to the
rear bumper when the select lever is
set to the
“
R
”
position
–
Objects with a surface which may
not reflect the sound wave emitted
from the sonar sensor such as a
chain link fence.
.
Objects the system is not designed
to detect
–
Pedestrians
–
Moving objects including moving
vehicles
–
Objects which absorb sound
waves such as cloth or snow
–
Objects whose surface has a
diagonal angle
–
Objects that are low to the
ground such as parking blocks
–
Objects that are high above the
ground such as objects hanging
from above
.
The system may not be able to
properly detect objects or may cause
a system malfunction when the follow-
ing conditions exist
High frequency sound from other
sources are nearby
–
Horn sound from another vehicle
–
Engine sound from other vehi-
cles
–
Sound of an air brake
–
Vehicle detection equipment or a
sonar from another vehicle
–
A sound wave with a frequency
similar to the vehicle
’
s system is
transmitted nearby
–
A vehicle equipped with the same
system is reversing toward your
reversing direction
7-68