Subaru WRX 2018, Руководство пользователя

Страница: 170 / 572

Instruments and controls/Warning and indicator lights
Inside warning
chime
Outside warning
chime
Operation indicator
on push-button igni-
tion switch
Status Action
Long beep
(continuous)
Long beep
(continuous)
—
Access key takeout without
“
P
”
po-
sition warning:
The driver exited the vehicle with the
access key fob and closed the driver
’
s
door while the push-button ignition
switch is in a position other than
“
OFF
”
and the select lever is in a position other
than the
“
P
”
position.
Shift the select lever to the
“
P
”
position,
switch the push-button ignition switch to
“
OFF
”
and exit the vehicle.
Long beep
(continuous)
— —
Select lever position warning:
.
Case 1: The driver
’
s door was
opened while the push-button igni-
tion switch is in a position other than
“
OFF
”
and the select lever is in a
position other than the
“
P
”
position.
.
Case 2: The engine is turned off by
pressing the push-button ignition
switch and the select lever is in a
position other than the
“
P
”
position.
.
Case 1: Shift the select lever to
the
“
P
”
position, switch the push-
button ignition switch to
“
OFF
”
and
exit the vehicle.
.
Case 2: Start the engine, shift
the select lever to the
“
P
”
position,
switch the push-button ignition
switch to
“
OFF
”
and exit the vehicle.
Ding
— —
The battery of the access key fob is low.
Replace the battery of the access key
fob.
Ding
—
Flashes in green (15
seconds max.)
Steering lock warning:
The engine start procedure was per-
formed, but the steering is still locked.
While turning the steering wheel right
and left lightly, depress the brake pedal
and press the push-button ignition
switch.
Ding
—
Flashes in orange
System malfunction warning:
A malfunction was detected in the power
system or steering lock.
Contact a SUBARU dealer immediately
and have the vehicle inspected.
NOTE
An electronic chirp will sound while the select lever is in the
“
R
”
position. In this case, the select lever position warning chime
will not sound.
3-32