Subaru WRX 2018, Руководство пользователя

Страница: 365 / 572

NOTE
.
While pressing the select lever but-
ton in, the indicator on the push-button
ignition switch will not turn green even
when the select lever is in the
“
P
”
position.
.
When the engine is not started, the
brake pedal may feel stiff. In such a
case, depress the brake pedal more
forcefully than usual. Check that the
operation indicator on the push-button
ignition switch turns green, and press
the push-button ignition switch to start
the engine.
!
In case of the engine does not
start by the normal engine start
procedure
1. Move the shift lever to the neutral
position (MT models), or move the select
lever to the
“
P
”
position (CVT models).
2. Switch the power status to
“
ACC
”
.
3. Press and hold the push-button igni-
tion switch for at least 15 seconds with the
clutch pedal (MT models)/brake pedal
(CVT models) depressed.
Although the engine may start, only use
this procedure in the case of an emer-
gency. If the engine still does not start,
refer to
“
Starting engine
” F
9-18.
!
Stopping engine
1. Stop the vehicle completely.
2. Move the select lever to the
“
P
”
position (CVT models).
3. Press the push-button ignition switch.
The engine will stop, and the power will be
switched to
“
OFF
”
.
WARNING
.
Do not touch the push-button
ignition switch while driving.
When you operate the push-but-
ton ignition switch as follows, the
engine will stop.
–
Pressing and holding the
switch for 3 seconds or long-
er.
–
Pressing the switch briefly 3
times or more in succession.
When the engine stops, the brake
booster will not function. A great-
er foot pressure will be required
on the brake pedal.
The power steering system will
not operate either. A greater
force will be required to steer,
and it may result in an accident.
.
If the engine stops while driving,
do not operate the push-button
ignition switch or open any of the
doors until the vehicle is stopped
in a safe location. It is dangerous
because the steering may be
locked. Stop the vehicle in a safe
location, and contact a SUBARU
dealer immediately.
CAUTION
For CVT models:
.
Do not stop the engine while the
select lever is in a position other
than the
“
P
”
position.
.
If the engine is stopped while the
select lever is in a position other
than the
“
P
”
position, the power
will be in
“
ACC
”
. If the vehicle is
left in this condition, the battery
may be discharged.
NOTE
Although you can stop the engine by
operating the push-button ignition
switch, do not stop the engine while
driving except in an emergency.
Starting and operating/Starting and stopping the engine
–
CONTINUED
–
7-13