Subaru WRX 2018, Руководство пользователя

Страница: 457 / 572

Access key fob
–
if access
key fob does not operate
properly
CAUTION
Keep metallic objects, magnetic
sources and signal transmitters
away from the area between the
access key fob and the push-button
ignition switch. They may interfere
with the communication between
the access key fob and the push-
button ignition switch.
The following functions may be inoperable
because of strong radio signals in the
surrounding area or a low battery condi-
tion of the access key fob.
.
Locking/unlocking doors
.
Switching power status
.
Starting the engine
In such cases, perform the following
procedure. When the battery of the access
key fob is discharged, replace it with a
new one. Refer to
“
Replacing battery of
access key fob
” F
11-51.
&
Locking and unlocking
1) Release button
2) Emergency key
While pressing the release button of the
access key fob, take out the emergency
key.
Lock or unlock the driver
’
s door with the
emergency key.
NOTE
After locking or unlocking, be sure to
reinsert the emergency key into the
access key fob.
&
Switching power status
1. Apply the parking brake.
2. Shift the shift lever into neutral (MT
models) or the select lever into the
“
P
”
position (CVT models).
3. Depress the clutch pedal (MT models)
or brake pedal (CVT models).
4. Hold the access key fob with the
buttons facing you, and touch the push-
button ignition switch with it.
When the communication between the
access key fob and the vehicle is com-
pleted, a chime (ding) will sound. At the
same time, the status of the push-button
ignition switch changes to either of the
following.
.
When the keyless access with push-
button start system is deactivated:
In case of emergency/Access key fob
–
if access key fob does not operate properly
–
CONTINUED
–
9-17