Strebel S-CB Px 120, Руководство по установке, эксплуатации и техническому обслуживанию

Страница: 55 / 118

S-CB Px 120 Manual 55
10.14. Setting the maintenance specifications
The following graphs describe how to check and program the maintenance settings. The standard factory setting
for this function is “OFF”.
MAINTENANCE SETTINGS
The unit can be programmed in such a way that an automatic maintenance message is displayed.
There are three options that can be selected. A maintenance message appears after:
* A programmed date is reached.
* An amount of burning hours is reached.
* An amount of ignition cycles is reached.
One single option can be activated or all three options.
Operating screen:
H E A T I N G : b o i l e r o f f
> > > : 1 2 3 . 4 ° C ( 1 2 3 . 4 ° C )
Press [MENU]
Select "Maintenan" using [ ◄ ] & [ ► ] and press [ENTER]
Operating screen:
M a i n t e n R e s e t
Press [ ▲ ] to reset the:
Counter for the total amount of burning hours.
Counter for the total amount of ignition cycles.
(The text will blink once briefly after resetting).
Operating screen:
M a i n t e n M o d e
Blinking second line.
What is blinking at the second line (before a selection is made)
is the active maintenance option.
Press [
▲ ] or [ ▼ ] to change the selected blinking
option.
Screen: Selecting of all maintenance options.
M a i n t e n M o d e
A l l
Press [ ► ] to set:
The option that is blinking can be changed using by [ ▲ ] & [ ▼ ]
* Date for the Maintenance message.
* Total amount of burning hours for the Maintenance message.
* Total amount of ignition cycles for the Maintenance message.
After selecting one of these values the boiler returns to the
maintenance operating screen.
Press [ENTER] to confirm the changes.
Confirmation screen:
A r e y o u s u r e
< C a n c e l ; > C o n f i r m
Press [ ◄ ] to cancel the changes or [ ► ] to confirm the
changes. Hereafter the boiler returns to the operating
screen.
Go to next
page