7
The installation must be carried out in accordance with the following regulations plus relevant codes & standards:
-
Due consideration must be given to current Health & Safety Legislation while this product is being installed.
-
Key Approved Documents to the Building Regulations, in the region of the United Kingdom that this product is
being installed.
-
The Local Building Regulations and Local water by-laws, and the Local Authority recommendations.
-
Wiring to the appliance must be in accordance with the IEE (BS 7671) Wiring Regulations the Health and Safety
Document No 635 “The Electricity at Work Regulations 1989” and any local regulations that apply.
-
CP 342: Part 2, 1994. Code of practice for centralised hot water supply
– buildings other than individual
dwellings.
-
CIBSE, Guides A, B and C.
Adhere to all regulations that are in force at the time of installation or service.
1.2
Declaration of Conformity
We declare that this appliance complies with the requirements of the following directives:
•
Machinery Directive (MD)
2006/42/EC
•
Pressure Equipment Device (PED)
2014/68/EC
•
Electromagnetic Compatibility Directive (EMC)
2014/30/EU
•
Low Voltage Directive (LVD)
2014/35/EU
1.3
Data Plate
Take notice of the reading on the data plate on each appliance as some reading will differ pending the
accessories ordered and fitted on building the unit.
A:
Trademark
B:
Mode
B1:
Code
C:
Serial Number
D:
N/A
E:
Heating Capacity Output kW
– Measured at A7 / W35
F:
N/A
G:
Heating Capacity Input kW
– Measured at A7 / W35
H:
Reference Standard
I:
Power Supply
L:
Maximum Absorbed Current
M:
Refrigerant Type and Charge Weight
N:
Unit Weight
O:
Sound Pressure Level at 1 Metre
P:
IP Protection Class
Q:
Maximum Pressure
– High Pressure Side
R:
Maximum Pressure
– Low Pressure Side
S:
PED Certification Body
Содержание S-ASX 30
Страница 2: ...2 ...
Страница 24: ...24 10 CORRECTIVE FACTORS 10 1 Heating Performances ...
