18
5 STANDARD SUPPLY, ADDITIONAL OPTIONS & ACCESSORIES
5.1
Standard Supply
The following items and software are supplied as standard with each S-ASX 30 -50 air source heat pump:
•
1 x Complete ASHP as described in chapter 2.2
: Pre-fitted, pressure tested and pre-charged.
•
1 x Main Heat Pump Controller:
Fitted to the ASHP with all internal components pre-wired. The controller
consists of:
i)
1 x Siemens Albatros
2
RVS21.826 main controller.
ii)
1 x Siemens AVS55.199.
iii)
2 x Siemens AVS75.370 extension module.
•
1 x Modulating System Pump:
To flow through the system side of the air source heat pump plate heat
exchanger to nearest thermal store pre-fitted and pre-wired with the heat pump casing.
•
1 x Outdoor Air Sensor:
Supplied loose, to be fitted and wired to heat pump controller on site.
•
2 x NTC Temperature Sensors 10k:
To be fitted into the top & bottom pockets of the thermal store and wired
back to the heat pump controller.
•
Soft Start Function
: Software activated as standard which reduces the compressor start current.
•
Low Noise Setup:
Acoustic insulation pre-fitted around refrigerant circuit and sound jackets pre-fitted around
compressors.
•
Cascade Software (LPB Interface):
The software will require activating on site once the cascade wiring be-
tween multiple heat pumps has been completed by the installers.
•
Modbus Software:
Allows communication by Modbus software.
•
Wired Remote Controller:
Supplied loose, it will need to be installed within plant room and wired back to the
heat pump controller.
Содержание S-ASX 30
Страница 2: ...2 ...
Страница 24: ...24 10 CORRECTIVE FACTORS 10 1 Heating Performances ...
