Order number: 900318.002 V0.31
Page 22
© Störk-Tronic 2021 • www.stoerk-tronic.com • Subject to modifications.
Parameter tables
o--
Oil
This level includes everything that concerns the frying oil:
• Oil check configuration (
o10
...
o31
)
• Evaluation of an external oil quality sensor (
o40
...
o41
)
• Settings for the alternate oil usage counter (
o50
...
o55
)
• Oil filtration settings (
o60
...
o67
)
• Parameters for the automated basket moving controls (
o70
...
o83
)
Oil check on startup:
It can be performed in 2 ways:
With one Sensor:
With 2 Sensors:
The device may be configured to react in different ways if the oil check fails.
Those are in general:
• Automated retries until it generates an error
• Manual acknowledge after each attempt
• Manual acknowledge after the first attempt, and then automated attempts until it generates an error
Oil filtration
The oil filtration provides assistance by applying the correct condition for the oil and the pan prior to the oil filtration in order to reduce
stress on the pan and keeping the oil in a state, where filtration can be performed easily.
It is recommended, that the pre-filtration checks are started before performing the filtration. But the process may be started at any time by
opening the valve on the Fryer (if available).
