Stonesoft stonegate 5.2 страница 62 Скачать руководство пользователя | Manualshive

Страница: 62 / 109

background image

62

Chapter 8

Installing the Engine on Intel-Compatible Platforms

Installing the Sensor or Analyzer Engine

StoneGate hardware appliances are delivered with pre-installed software. If you are using a
StoneGate appliance, configure the software as instructed in the

Appliance Installation Guide

delivered with the appliance.
On other systems, the software is installed from CD-ROMs. Depending on your order, you may
have received ready-made Management Center and IPS engine CD-ROMs. If the CD-ROMs are
not included in the order, you will first have to create them.
The installation steps for a Sensor, Analyzer, and combined Sensor-Analyzer are similar, as the
engine type is only selected at the end of the installation.

Configuration Overview

1. If you do not have ready-made installation CD-ROMs, obtain the files from the Stonesoft

website. See

Obtaining Installation Files

2. Start the installation and select the installation type. See

Starting the Installation

3. Configure the engines and establish contact with the Management Server. See

Configuring the Engine

Obtaining Installation Files

Downloading the Installation Files

1. Go to the download page at the Stonesoft website:

https://my.stonesoft.com/download

2. Download the

.iso

image files.

Checking File Integrity

Before installing StoneGate from downloaded files, check that the installation files have not
become corrupt or been modified. Using corrupt files may cause problems at any stage of the
installation and use of the system. File integrity is checked by generating an MD5 or SHA-1 file
checksum of the downloaded files and by comparing the checksum with the checksum on the
download page at the Stonesoft website.

Caution – Check that the Automatic Power Management (APM) and Advanced
Configuration and Power Interface (ACPI) settings are disabled in BIOS. Otherwise, the
engine may not start after installation or may shut down unexpectedly.

Note – The engines must be dedicated to StoneGate IPS. No other software can be
installed on them.

What’s Next?



If you have ready-made CD-ROMs, proceed to

Starting the Installation



Otherwise, start by

Obtaining Installation Files

«
...
60
61
62
63
64
...
»

Содержание stonegate 5.2














































































































Отзывы:

Нет отзывов

Похожие инструкции для stonegate 5.2

Бренд: Eaton Страницы: 32

Бренд: Zenith Страницы: 14

Бренд: Observint Страницы: 2

Бренд: 4xem Страницы: 2

Бренд: 4xem Страницы: 64

Бренд: RainWater Harvesting Страницы: 3

Total Solutions TSS-800

Бренд: Infinity Страницы: 26

Бренд: TPG Страницы: 6

Бренд: Quantum Страницы: 6

Бренд: UDP Technology Страницы: 17

Бренд: Daewoo Страницы: 21

Бренд: jablotron Страницы: 2

Бренд: ATV Страницы: 8

Бренд: Teledyne Detcon Страницы: 15

Бренд: Abus Страницы: 99

Бренд: Idis Страницы: 43

Бренд: W Audio Страницы: 12

Бренд: Nivel System Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды