Stonesoft stonegate 5.2, Руководство по установке

Страница: 43 / 109

43
Bypassing Traffic on Overload
3. Select Inline Interface as the Type .
4. ( Optional ) Change the automatically selected Second Interface ID .
5. Leave Inspect Unspecified VLANs selected if you want the sensor to inspect traffic also
from VLANs that are not included in the sensor’s interface configuration.
6. If your configuration requires you to change the Logical Interface from Default_Eth, click
Select and select the Logical interface in the dialog that opens.
7. Click OK .
Repeat these steps to define any additional inline interfaces.
Bypassing Traffic on Overload
By default, inline sensors inspect all connections. If the traffic load is too high for the inline
sensor to inspect all the connections, some traffic may be dropped. Alternatively, inline sensors
can dynamically reduce the number of inspected connections if the load is too high. This can
improve performance in evaluation environments, but some traffic may pass through without any
access control or inspection.
 To bypass traffic on overload
1. Switch to the Advanced tab.
2. Select Bypass traffic on overload .
What’s Next?
 To define how an inline sensor handles traffic when the load is too high, proceed to
Bypassing Traffic on Overload (page 43).
 Otherwise, proceed to Finishing the Engine Configuration (page 44).
3
What’s Next?

Proceed to Finishing the Engine Configuration (page 44).
2