Stonesoft stonegate 5.2, Руководство по установке

Страница: 47 / 109

47
Saving the Initial Configuration for Sensors and Analyzers
2. Right-click the Sensor or Analyzer element and select Save Initial Configuration . The Initial
Configuration dialog opens.
 To prepare for configuration using the Configuration Wizard
1. ( Optional ) If you plan to enter the information manually, write down or copy the
Management SSL Fingerprint . Using the fingerprint increases the security of the
communications when the engine contacts the Management Server.
2. If you plan to enter the information manually, write down or copy the One-Time Generated
Password for each engine. Keep track of which password belongs to which node.
3. ( Optional ) If you plan to import the configuration in the Configuration Wizard, you can Enable
SSH Daemon and select the Local Time Zone and Keyboard Layout .
4. (Sensors only) Click Select and select the appropriate policy if you already have a policy you
want to use. The selected policy is automatically installed after the Sensor has contacted
the Management Server. See Installing the Initial Policy (page 55) for descriptions of the
available pre-defined policies.
5. If you plan to import the configuration in the Configuration Wizard, click Save As and save
the configuration on a USB memory stick.
6. Click Close .
What’s Next?

If you want to use the Configuration Wizard, proceed to the section To prepare for
configuration using the Configuration Wizard (page 47).

For fully automatic configuration, proceed to the section To prepare for fully automatic
configuration (page 48).
What’s Next?
 Proceed to Transferring the Initial Configuration to Sensors and Analyzers (page 49).
2