Stoll CMS 730 S Скачать руководство пользователя страница 75

Страница: 75 / 468

Producing with the knitting machine

3.2 Threading up yarn

3. Thread the thread vertically downwards in the eyelet (2) of the lateral

yarn tensioner. For quicker orientation a vertically running riffle is
attached in the safety door.

4. Feed the thread through the yarn deflector (3) to the yarn carrier.

5. Bring lateral yarn tensioner in work position.

6. With type 2: Pull the thread in the open eyelet (4) of the permanent

brake.

3.2.8

Threading up yarns into yarn carrier

Threading up the threads into the
respective next eyelet on the yarn
carrier.

If several yarn carriers of one track are
used and the threads are led to the yarn
carriers from the same side.

If several bobbins are used for one yarn
carrier.



Threading up yarns from left and
right.



Make sure that almost the same
number of threads are used from left
and right.

Содержание CMS 730 S





















































































































































































































































































































































































































































































Результаты поиска

Содержание CMS 730 S

Отзывы:

Бренды по названию

Популярные бренды

Stoll CMS 730 S, Руководство по эксплуатации

Результаты поиска

Содержание CMS 730 S

Отзывы:

Бренды по названию

Популярные бренды