Stoll CMS 730 S Скачать руководство пользователя страница 202

Страница: 202 / 468

Adjusting knitting machine

Advanced adjustments 4.2

198

5. Cick the required yarn carrier.



The setting window appears.

6. Save changes and end setting process for this yarn carrier.

7. Repeat the steps 5 to 6 until all the yarn carriers are located on their

correct positions (yarn carrier home position).

8. Call up "Main menu".

Further information:



Checking the braking values with the adjusting program [-> 199]

Moving yarn
carriers

to the left

Only possible if no other yarn carrier is located on
the left hand-side.

to the right Only possible if no other yarn carrier is located on

the right hand-side.

Delete yarn
carrier

Only the rightest yarn carrier can be deleted.



Delete from the right to the left.

: Delete the yarn carrier only if you really are going to remove

it from the machine. Its braking values are deleted.



If you reassembly the yarn carrier, then the braking values must
be redetermined.

Activate
yarn carrier

Reactivate a deleted yarn carrier.



Activate from the left to the right.



If two or more yarn carriers are to be activated, then activate the
yarn carrier furthest to the left first.

: If an action is not possible, the key is inactive (gray)

Содержание CMS 730 S





















































































































































































































































































































































































































































































Результаты поиска

Содержание CMS 730 S

Отзывы:

Бренды по названию

Популярные бренды

Stoll CMS 730 S, Руководство по эксплуатации

Результаты поиска

Содержание CMS 730 S

Отзывы:

Бренды по названию

Популярные бренды