Stoll CMS 730 S Скачать руководство пользователя страница 103

Страница: 103 / 468

Producing with the knitting machine

3.5 Eliminating errors in the fabric

3.5.3

Removing fabric winding around fabric take-down

Fabric winding in main take-

down

1. To remove the fabric winding, call up the "Take-down" window.



"Take-down" window

2. Tap the "Main take-down Op." key (1).

3. Pull the fabric smooth and free the take-down rollers from loose threads

and fabric remainders

- or -

➜

Press the "Main take-down Backw." (2) key until the fabric winding can
be removed.

4. Tap the "Main take-down Clo." key to close the main take-down.

5. To continue knitting, start the machine with the engaging rod.

Fabric winding in auxiliary

take-down

1. To remove the fabric winding, call up the "Take-down" window.

2. Remove needle bed or position it at an angle.

3. Tap the "Auxiliary take-down Op." key (3).

4. Press the "Auxiliary take-down backw." key until the fabric winding can

be removed.

5. Free the take-down rollers from loose threads and fabric remainders.

6. To close the auxiliary take-down, tap the "Auxiliary take-down Clo." key.

7. Screw on the needle bed again tight.

8. To continue knitting, start the machine with the engaging rod.

Further information:



Remove needle bed or position it at an angle [-> 342]

Key

Function

Call up "Take-down" window

Key for removing fabric winding around fabric take-down

Содержание CMS 730 S





















































































































































































































































































































































































































































































Результаты поиска

Содержание CMS 730 S

Отзывы:

Бренды по названию

Популярные бренды

Stoll CMS 730 S, Руководство по эксплуатации

Результаты поиска

Содержание CMS 730 S

Отзывы:

Бренды по названию

Популярные бренды