Stoll CMS 730 S, Руководство по эксплуатации

Страница: 442 / 468

Yarns and stitch tension
9
Yarn table 9.3
438
Knitting technique
information
Gauge assembled processing
[Nm] Final count [Nm]
6.2
(all needles)
2 x 44/2
1 x 28/2
10 - 16
6.2
(each 2nd needle)
2 x 28/2
3 x 28/2
4,5 - 7
7.2
(all needles)
1 x 28/2
1 x 30/2
14 - 20
7.2
(each 2nd needle)
2 x 28/2
2 x 30/2
6 - 8
8.2
(all needles)
1 x 50/2
2 x 60/2
15 - 25
8.2
(each 2nd needle)
2 x 50/2
3 x 60/2
10 - 12
9.2
(all needles)
1 x 40/2
1 x 60/2
20 - 30
9.2
(each 2nd needle)
2 x 40/2
2 x 44/2
2 x 60/2
3 x 60/2
10 - 16
Yarn table - Allocation of machine gauge and yarn thickness (Table 3)
Gauge Explanation
2,5.2 and 3,5.2 (knit
and wear) If an extreme yarn (non-elastic and/or very thick) is used, it
should not be knitted too loosely (in the upper NP area), as
there is a danger of wear of the cams and needle bed.
9.2 For tight knitting, special cams must be used (ID No. 213
303, 213 304 and 210 285). They are included in the
machine accessories.
Knitting technique information