Stoll CMS 730 S Скачать руководство пользователя страница 318

Страница: 318 / 468

Maintenance of the knitting machine

Cleaning the knitting machine 6.2

314

6.2.9

Cleaning fan and radiators in right control unit

1. Switch off the machine and wait until the machine is currentless.

2. Swing open the cover on the right-hand control unit.



Control unit

3. Vacuum-off and blow-out the fan (1) and heat sink (2).

4. Close the cover on the right control unit.

5. Switch on machine.

6.2.10

Cleaning filter mat of power supply unit

1. Swing open the cover on the left control unit.



Fan power supply unit

2. Remove screw (1) and hinge down the housing toward the front.

3. Remove filter mat and blow it out with compressed air.

4. If heavy soiling is present, vacuum off and blow out the radiator (2).

5. Replace filter mat.

6. Swing in the cover on the left control unit.

The fan is temperature-controlled.

Содержание CMS 730 S





















































































































































































































































































































































































































































































Результаты поиска

Содержание CMS 730 S

Отзывы:

Бренды по названию

Популярные бренды

Stoll CMS 730 S, Руководство по эксплуатации

Результаты поиска

Содержание CMS 730 S

Отзывы:

Бренды по названию

Популярные бренды