Stoll CMS 730 S Скачать руководство пользователя страница 341

Страница: 341 / 468

337

Repairing the knitting machine

7.3 Replacing parts

7.3.1

Replacing needle and coupling part



Replacing needle and coupling part

1. Pull-out the needle rail (1) with the extraction hook (6).

2. Pull needle (2) upwards, the coupling part (3) will, with it, also be pulled

upwards.

3. When the butt of the coupling parts (4) bumps into the holding-down

jack bed, press the coupling part downward. Pull out the needle and
coupling part upward.

4. Assemble the new needle and coupling part.

5. To mount the new needle and coupling part, push the butt of the

coupling part through into the needle bed under the jack bed. While
doing so, make sure that the needle is guided in above the knock-over
wire.

Содержание CMS 730 S





















































































































































































































































































































































































































































































Результаты поиска

Содержание CMS 730 S

Отзывы:

Бренды по названию

Популярные бренды

Stoll CMS 730 S, Руководство по эксплуатации

Результаты поиска

Содержание CMS 730 S

Отзывы:

Бренды по названию

Популярные бренды