manualshive.com logo in svg

Stoll CMS 730 S, Руководство по эксплуатации

Поделиться
Скачать
Stoll CMS 730 S Скачать руководство пользователя страница 348

Repairing the knitting machine  

7 

Replacing parts  7.3 

344

7.3.6

Repairing needle bed and additional needle bed

Damaged needle bed

If the carriage is blocked, the needle bed may be damaged. This means that 
the movable parts (needles, coupling part, intermediate slider and selection 
jack) do not move smoothly or are blocked. This damage must be 
eliminated carefully and conscientiously before the machine is started up 
again. If it is not, a risk of the carriage blocking again immediately and 
damaging the needle bed again is present.

When performing repairs, the needle bed types must be determined. There 
are two different versions: milled and combined needle beds. The additional 
beds are always milled.

   

Milled needle bed

1. If the carriage blocks, then separate the connection of the carriage part 

to the carriage. Move carriage to the next reversal point. Lift carriage 
part from needle bed. Check cam parts for damage and remove broken 
working butts from the moving parts.

2. Find the channel chisel and channel file accessories.

3. Remove the movable parts (needle, coupling part etc.) at the point of 

damage.

Needle Bed

Description

Milled

The grooves for the moving parts have been cut out of the needle 
bed.

Combined

The needle bed is composed of individual stays. They are inserted 
into a base plate and screwed down.

Repairs must be carried out very carefully and without the 
use of force.

Содержание CMS 730 S





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды