Stoll CMS 730 S Скачать руководство пользователя страница 421

Страница: 421 / 468

417

Software - Installation and basic settings

8.4 Installing the Stoll operating system

8. Confirm selection.



The installation process gets started.



The "Language" window is displayed after having selected the
"Installation without configuration" check box.



- or -



The "Reference runs" window is displayed after having selected the
"Installation without configuration" check box.

9. If the "Language" window is displayed, continue with the

Machine

configuration

section.

- or -

➜

If the "Reference runs" window is displayed, continue with the

Start

Reference runs

section.

Configure machine

✔

The "Language" window is displayed.

1. Select the dialog language and confirm the selection.

2. Proceed to the next window.



The "Machine configuration" window is displayed. The data have
been set at the factory and will not be changed.

3. Proceed to the next window.



The "Machine configuration 2" window is displayed. The data have
been set at the factory and will not be changed.

4. Proceed to the next window.



The "Machine Options" window is displayed. The data is set at the
factory.

5. If necessary, change the data and confirm the changes.

6. Proceed to the next window.



The "Machine Parameter" window is displayed. The data is set at
the factory.

7. If necessary, change the data and confirm the changes.

8. Proceed to the next window.



The "Needle bed parameters" window is displayed. The data is set
at the factory.

9. If necessary, change the data and confirm the changes.

10. Proceed to the next window.



The "NPK-Values" window is displayed. The data is set at the
factory.

Machine fault!



The presence or lack of machine options must correctly be
specified, as otherwise a fault may occur on the machine.



Always specify the machine options correctly.

Содержание CMS 730 S





















































































































































































































































































































































































































































































Результаты поиска

Содержание CMS 730 S

Отзывы:

Бренды по названию

Популярные бренды

Stoll CMS 730 S, Руководство по эксплуатации

Результаты поиска

Содержание CMS 730 S

Отзывы:

Бренды по названию

Популярные бренды