manualshive.com logo in svg

Stoll CMS 730 S, Руководство по эксплуатации

Поделиться
Скачать
Stoll CMS 730 S Скачать руководство пользователя страница 192

Adjusting knitting machine  

4 

Advanced adjustments  4.2 

188

5. Open the lock of the rear panel segments with the square wrench from 

the enclosed accessories and take off the segments.

6. loosen screws (2) and remove them.

Coupling of carriage assembly

7. For narrow coupling (tandem machine), push the left carriage assembly 

to the right and hook in the coupling rod (1)

8. Insert the screws (2) and tighten.

9. Close the rear panel.

10. Switch on 40 V power supply.

11. Call up the "Service" menu.

12. Call up the "Reference runs" window.

13. Press the "SR!>" key and start the machine with the engaging rod.

The carriage assembly runs in the creep speed until it automatically 
stops and the message "Reconfiguration" appears on the display. 
The control adjusts to the new coupling width. After a short time the 
message disappears again.

14. Move carriage to the left. Thereby in the window "Reference runs" tap 

on the key "S<" and start machine with the engaging rod.

15. If the carriage is located outside the needle bed, stop the machine.

16. In the window "Reference runs" tap on the key "S>". Pull up the 

engaging rod for short. The carriage may run only a few centimeters 
towards right.

The reference run is completed.

17. Load the knitting program.

Further information:

Calling up yarn carrier assignment and allocation [-> 65]

Helpful knitting rows [-> 334]

Switching power supply 40 V off and on [-> 331]

Removing and mounting carriage part [-> 348]

Removing cam plate [-> 355]

Содержание CMS 730 S





















































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды