Still LXT 120 Скачать руководство пользователя

Страница: 187 / 324

DANGER

Depending on the model, a tow coupling is only

designed for limited support loads. Overloading can

deform or destroy it. Too high a support load can

also damage or destroy parts of the chassis frame.

It can also have a dangerous effect on the handling

characteristics of the industrial truck.

–

Observe the support loads for the different tow

couplings specified in these operating instructions!

These may differ from the support loads indicated

on the identification plate of the tow couplings.

–

The tow coupling should be subjected only to hori-

zontal loads; the tiller must be horizontal.

DANGER

If you briefly leave the industrial truck to couple or

uncouple it, there is a risk of fatal injury caused by

the truck rolling away and running you over.

–

Apply the parking brake.

–

Switch off the key switch and remove the key.

DANGER

If the coupling pin drops out or is damaged during

towing, the trailer will become loose and uncontrol-

lable. Risk of accident!

–

Use only original coupling pins that have been

checked for good condition!

–

Ensure that the coupling pin is correctly inserted

and secured.

WARNING

Never reach between the coupling pins and the tow-

ing jaws. If the component moves suddenly there is a

risk of injury!

–

Close the coupling pin with the appropriate lever

on the tow coupling or use a suitable aid (e.g.

assembly lever).

–

Always close the automatic tow coupling when it

is not being used.

Operation

Trailer and load

175

50078078001 EN - 07/2022 - 04

Содержание LXT 120





































































































































































































































































































































Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды

Still LXT 120, Оригинальное руководство пользователя

Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды