Still LXT 120 Скачать руководство пользователя

Страница: 122 / 324

Cab

Cab doors

Four different door variants are available for

the tow tractor and the platform tractor:

●

Folding doors

●

Sliding doors (tow tractors only)

●

Bracket/summer doors

●

Fabric doors

Safety information and rules of behav-

iour

WARNING

Under no circumstances can the cab be considered

an overhead guard. It serves purely as weather pro-

tection and does not provide protection against slip-

ping loads.

–

Always check that the load is correctly positioned

and secured.

WARNING

Possible serious injury!

–

Do not lean out past the door contour while the

truck is in motion.

–

Do not extend arms or legs out past the door

contour.

WARNING

Risk of injury!

–

Open and close doors only when the industrial

truck is stationary.

–

If any panes have become scratched, faulty

or opaque, have them replaced by the au-

thorised service centre.

–

Doors must only be replaced by the author-

ised service centre. This also applies when

changing from one door variant to another.

–

Open and close doors only when the indus-

trial truck is stationary.

–

Only open and close doors using the oper-

ating devices or handles provided for this

purpose.

Operation

Cab

110

50078078001 EN - 07/2022 - 04

Содержание LXT 120





































































































































































































































































































































Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды

Still LXT 120, Оригинальное руководство пользователя

Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды