Still LXT 120 Скачать руководство пользователя

Страница: 225 / 324

NOTE

Battery maintenance is carried out in accord-

ance with the battery manufacturer's operating

instructions. The operating instructions for the

battery charger must also be followed. Only

the instructions that came with the battery

charger are valid. If any of these instructions

are missing, request the relevant instructions

from the dealer.

The battery maintenance information is com-

posed of the following sections: "Checking the

status, acid level and acid density of the bat-

tery", "Checking the battery charge status",

"Charging the lead-acid battery" and "Equalis-

ing charge to maintain the battery capacity".

Checking the battery condition,

acid level and acid density

WARNING

The electrolyte (diluted sulphuric acid) is

poisonous and corrosive!

–

Observe safety regulations for han-

dling battery acid; see the chapter en-

titled "Battery acid".

–

Wear personal protective equipment

(rubber gloves, apron and protection

goggles).

–

Rinse away spilt battery acid immedi-

ately using plenty of water!

CAUTION

Risk of damage!

–

Note the information in the operating instructions

for the battery.

–

Remove the battery from the industrial

truck.

–

Inspect the battery for any cracks in the

housing, raised plates and acid leaks.

–

Have defective batteries repaired by the au-

thorised service centre.

Operation

Handling the lead-acid batteries

213

50078078001 EN - 07/2022 - 04

Содержание LXT 120





































































































































































































































































































































Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды

Still LXT 120, Оригинальное руководство пользователя

Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды