Still LXT 120, Оригинальное руководство пользователя

Страница: 43 / 324

CAUTION
Danger of damage to the industrial truck if non-origi-
nal parts are used!
Installation and use of non-original parts may ad-
versely affect the design features of the industrial
truck and thus impair active and/or passive driving
safety.
–
Only use products that have been tested and ap-
proved by the manufacturer.
–
The approval of the manufacturer and, if neces-
sary, the relevant regulatory authorities must be
obtained before installing non-original parts.
The manufacturer accepts no liability for any damage
caused by the installation and use of non-original
parts and accessories without approval.
Damage, defects and misuse of
safety systems
Damage or other defects on the industrial
truck must be reported to the supervisor or the
fleet manager responsible immediately so that
they can arrange for the defect to be rectified.
Industrial trucks that are not safe for operation
or for use on the road must not be used until
they have been properly repaired.
Do not remove or deactivate safety systems
and switches.
Fixed set values may only be changed with
the approval of the manufacturer.
Work on the electrical system (e.g. connect-
ing a radio, additional headlights etc.) is only
permitted with the manufacturer's written ap-
proval. All work carried out on the electrical
system must be documented. Contact the au-
thorised service centre.
Tyres
The following factors can have a negative ef-
fect on the handling of the industrial truck and
are therefore prohibited:
●
Different tyres on the same axle, e.g. pneu-
matic tyres and superelastic tyres
●
Tyres not approved by the manufacturer
●
Excessive tyre wear
Safety
2
Basic principles for safe operation
31 50078078001 EN - 07/2022 - 04