Still LXT 120 Скачать руководство пользователя

Страница: 198 / 324

Closing the coupling manually

DANGER

Risk of injury from hand becoming trapped! The

coupling pin snaps down very quickly when the tow

coupling is actuated.
Do not reach your hand into the vicinity of the cou-

pling pin if, for example, a tow rope is to be attached

to the tow coupling.

–

Push the closing lever (4) downwards as far

as it will go. The coupling pin snaps down.

It is correctly engaged if the control pin (3)

does not protrude from its guide.

The tow coupling is closed.

Uncoupling the trailer

–

Take measures to prevent the trailer from

rolling away, e.g. using wedges.

–

Push the hand lever (1) upwards until the

coupling pin engages.

The tow coupling is opened.

–

Slowly drive the industrial truck forwards

with the reverse inching function until the

tow bar eye and the towing jaws are sepa-

rated.

–

To close the tow coupling again, push the

closing lever (4) all the way down. The cou-

pling pin snaps down.

NOTE

To protect the lower coupling pin bush against

contamination, always keep the tow coupling

closed.

Maximum support load

Depending on the mounting location, the fol-

lowing maximum support loads are permitted

for the tow tractor and the platform tractor:



Operation

Trailer and load

186

50078078001 EN - 07/2022 - 04

Содержание LXT 120





































































































































































































































































































































Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды

Still LXT 120, Оригинальное руководство пользователя

Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды