Still LXT 120 Скачать руководство пользователя

Страница: 82 / 324

Switching on

Switching on the key switch

WARNING

Automatic brake function test.
When the industrial truck is switched on, the service

brake performs an automatic self test. The brake is

applied without the driver depressing the brake ped-

al.

–

Therefore, the brake system must not be opened

before the truck is switched on, e.g. to bleed it.

WARNING

Before switching on the industrial truck, all checks

and tasks required before daily use must have been

performed without any defects being identified.

–

Perform the visual inspections and function check-

ing.

–

Do not operate the industrial truck if defects have

been detected; contact the authorised service

centre.

–

Insert the switch key (1) into the key switch

and turn to the "I" position.

NOTE

If the industrial truck is equipped with the "Ac-

cess authorisation with PIN code" variant, the

display initially changes to the input menu for

access authorisation. See the chapter entitled

"Access authorisation with PIN code".

Once the industrial truck is ready for opera-

tion, the main display appears on the display

of the display-operating unit. See the chapter

entitled "Overviews".



Operation

Switching on

50078078001 EN - 07/2022 - 04

Содержание LXT 120





































































































































































































































































































































Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды

Still LXT 120, Оригинальное руководство пользователя

Результаты поиска

Содержание LXT 120

Отзывы:

Похожие инструкции для LXT 120

Бренды по названию

Популярные бренды