Still LXT 120, Оригинальное руководство пользователя

Страница: 69 / 324

Checking the parking brake
On an uphill gradient or a ramp
DANGER
Risk of fatal injury from being run over if
the industrial truck rolls away.
–
Do not exit the industrial truck during
the following check.
–
Stop the industrial truck on a steep uphill
gradient (e.g. a ramp) and actuate the park-
ing brake. To do this, actuate the push but-
ton (1) in the centre console. The parking
brake engages audibly and the LED (2) in
the push button starts to light up.
The parking brake must hold the industrial
truck on the incline.
–
If the industrial truck rolls back despite the
parking brake being applied, notify the au-
thorised service centre.
On level ground
–
Find a sufficiently large, open area in which
no other traffic will be obstructed.
–
Accelerate the industrial truck to walking
speed.
–
Press the emergency off switch. The park-
ing brake is applied.
The industrial truck must decelerate and re-
main stationary.
WARNING
Risk of accident!
The industrial truck can slow down jerkily.
–
Use the restraint systems.
–
If the industrial truck only coasts and does
not decelerate or decelerates only slightly,
unlock the emergency off switch and stop
the industrial truck using the service brake.
–
Secure the industrial truck with wedges so
that it cannot roll away.
–
Contact the authorised service centre.

Operation
4
Checks and tasks before daily use
57 50078078001 EN - 07/2022 - 04