Still LTX 50 Скачать руководство пользователя страница 94

Страница: 94 / 286

Accessory mounting bar with da-

ta socket (optional)

The optional data socket (6 and 7) is fitted on

the relevant accessories mounting bar (3).

The pre-wired data socket (6) is connected to

the truck and may have one of the following

two characteristics depending on the choice

made by the customer during purchase:

●

24 V voltage and 5 A current

●

12 V voltage and 10 A current

WARNING

If you are not using the data socket (6), protect it

from the weather, dust etc. using the cap (5).
Do not leave the data socket (6) uncovered.

In addition to the optional "accessories mount-

ing bar with data socket" the customer is also

provided with a plug (4).
If necessary, wire the plug (4) to be connected

to the customer's data terminal as follows:

●

Connect the positive to terminal (1)

●

Connect the negative to terminal (2)

DANGER

Always respect the connections mentioned above

(1 and 2)
Reversing the polarity is dangerous and strictly pro-

hibited.

WARNING

The instructions provided are for information only. In-

stallation must be carried out precisely and in ac-

cordance with technical regulations. Only the manu-

facturer's own approved sales network is authorised

to assemble and install accessories. The manufac-

turer will NOT be liable for any personal injury or

damage caused by unauthorised third parties. Con-

tact the manufacturer's authorised service network.

2372

Positive

Negative

Accessories mounting bar

Plug to be wired

Plug

Data socket

Data terminal support



Overview

Options and variants

45878043344 EN - 11/2021 - 12

Содержание LTX 50































































































































































































































































































Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды

Still LTX 50, Оригинальное руководство пользователя

Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды