Still LTX 50 Скачать руководство пользователя страница 197

Страница: 197 / 286

Recharging the battery using the on-board battery charger (optional)

CAUTION

Charge the battery with the truck turned off, the start

key removed and the battery hood open.

DANGER

The battery must be charged in rooms that comply

with applicable regulations. Refer to the battery and

battery charger manuals to see the charging proce-

dures, level checks etc., checking the battery type

(gel, lead etc.) and making sure of the voltage and

current delivered. Excessive currents can damage

the battery and cause dangerous situations. As re-

gards safety precautions, follow the instructions

given in the battery manual and those included in

the "Safety guidelines" of this manual.

DANGER

If the truck is fitted with an on-board battery charg-

er, connecting the battery to an external battery

charger is strictly prohibited.

CAUTION

Make sure that the mains supply voltage complies

with the battery charger's working voltage.

DANGER

The electrical system connected to the on-board

battery charger plug must comply with the national

regulations in force and European standard EN

60204-1.

Instructions:

2396

end of charge

error

no battery

charging

The label (1) informs the operator about the

charging status, indicated by LED (2):

●

LED with steady red light
The battery is charging

●

LED with steady green light
The battery has fully charged

●

LED with flashing red light
Alarm to the charging system; contact the

service centre authorised by the manufac-

turer.

Charging procedure:

●

Access the upper part of the battery, open

the battery hood and hold the hood open.

●

Connect the on-board battery charger plug

to the mains socket

Use

Charging the battery

187

45878043344 EN - 11/2021 - 12

Содержание LTX 50































































































































































































































































































Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды

Still LTX 50, Оригинальное руководство пользователя

Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды