Still LTX 50 Скачать руководство пользователя страница 110

Страница: 110 / 286

Authorised and safe use

Intended use of the trucks

CAUTION

This machine is intended for the transport of loads

packed on pallets or in industrial containers designed

for this purpose, as well as for placing pallets into

and removing pallets from stock.
The dimensions and capacity of the pallets or con-

tainers must be adapted to the load being transpor-

ted to ensure stability.
The table of characteristics and performance attach-

ed to this user manual gives you some of the infor-

mation you need to check that the equipment is suit-

able for the work being carried out.
Any specific usage must be authorised by the site

manager; an analysis of the potential risks associ-

ated with this usage will enable him to put in place

any necessary additional safety measures.

Safety instructions for using the

truck

Behaviour when driving

The operator must obey the same rules within

the plant as on the road. The operator must

drive at a speed appropriate for the driving

conditions. For example, the operator should

drive slowly around corners, when entering

and travelling through narrow passageways,

when driving through swing doors, at blind

spots or on uneven surfaces. The operator

must always maintain a safe distance from ve-

hicles and persons in front of him, and must

always have the truck under control. The oper-

ator must choose a travel speed suitable for

the work environment that ensures sufficient

space for braking. Be aware that the braking

distance increases disproportionately to the

speed of the truck and that the wheels can

skid on the floor when braking sharply. The

operator must avoid sudden stops, making

fast U-turns and overtaking other vehicles in

potentially dangerous areas or areas with poor

visibility. The operator must face the direction

of travel and have sufficient visibility of the

Use

Authorised and safe use

100

45878043344 EN - 11/2021 - 12

Содержание LTX 50































































































































































































































































































Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды

Still LTX 50, Оригинальное руководство пользователя

Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды