Still LTX 50 Скачать руководство пользователя страница 114

Страница: 114 / 286

Order picker trucks: Description of intended use

The order picking trucks described in this

manual are ideal for picking up and depositing

goods manually from the aisles and/or shelves

of the warehouse (picking).
It is also permitted to stack or pick up loads

from the shelves using the forks of the truck,

but great care must always be taken as there

are dangerous situations caused by the follow-

ing residual risks.

CAUTION

Risk of crush injuries or death!
While depositing/picking up loads from the shelves

using the forks, there is a risk of injury to the opera-

tor.
There is a risk of the operator becoming severely

crushed between the shelves and the steering wheel

(cockpit) or of being injured by collisions with the

shelving cross pieces, cross bars or any other com-

ponents of the load-bearing structure of the ware-

house.

–

The picture to the side shows an example

of the danger present during an incorrect

manoeuvre, and which thus must not be

emulated. When driving in reverse, the op-

erator is in danger of colliding with the metal

cross piece at the entrance to the shelving.

It is the responsibility of the employer of the

truck operating company to:

●

Identify and eliminate any risks present

●

Eliminate risks present in any hazardous

areas

●

Consider prohibiting any use of the truck in

applications other than those covered by

the specific risk analysis, if necessary

●

Inform operators who use the truck of the

correct operating procedures by issuing

specific instructions

Use

Authorised and safe use

104

45878043344 EN - 11/2021 - 12

Содержание LTX 50































































































































































































































































































Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды

Still LTX 50, Оригинальное руководство пользователя

Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды