Still LTX 50 Скачать руководство пользователя страница 129

Страница: 129 / 286

CAUTION

Seat operation
With the seat fully closed (A), the operator must drive

the truck standing on the platform.
With the seat fully open (B), the operator must drive

the truck sitting on the seat.
When the seat is in the intermediate positions be-

tween (A) and (B), the truck is immobilised.

The seat is height-adjustable to improve oper-

ator ergonomics:

●

To raise the seat, push the toggle lever (4)

upwards (C) and, at the same time, pull the

seat backrest (3) slightly upwards (D) with

the other hand. Release the toggle lever (4)

once the desired height has been reached.

●

To lower the seat, push the toggle lever (4)

upwards (C) and, at the same time, push

the seat backrest (3).down (E) with the oth-

er hand. Release the toggle lever (4) once

the desired height has been reached.

Use

Optional driver's seat adjustments

119

45878043344 EN - 11/2021 - 12

Содержание LTX 50































































































































































































































































































Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды

Still LTX 50, Оригинальное руководство пользователя

Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды