Still LTX 50 Скачать руководство пользователя страница 123

Страница: 123 / 286

Ergonomic dimensions

From the correct driving position, operators

must be able to reach and operate all the con-

trols in the truck and also the safety/emergen-

cy devices. Furthermore, they must have good

visibility to ensure that loads are picked up

correctly, as well as adequate control over the

truck while driving.
Consequently, the truck has been designed in

accordance with the EN ISO 3411 standard:

●

Operator height (including shoes) between

1550 mm and 1905 mm.

●

Operator weight between 51.9 kg and

114.1 kg.

Operators whose physical characteristics dif-

fer from those specified above may have diffi-

culty using the truck correctly. Driving ergo-

nomics may also be sub-optimal for these op-

erators.
In any case, Directive 2009/104/EC of the Eu-

ropean Parliament and of the Council states

that "the employer shall take the measures

necessary to ensure that the work equipment

made available to workers in the undertaking

or establishment is suitable for the work to be

carried out or properly adapted for that pur-

pose and may be used by workers without im-

pairment to their safety or health".
"In selecting the work equipment which he

proposes to use, the employer shall pay atten-

tion to the specific working conditions and

characteristics and to the hazards which exist

in the undertaking or establishment, in particu-

lar at the workplace, for the safety and health

of the workers, and any additional hazards

posed by the use of the work equipment in

question".

WARNING

Trucks with a protective roof (optional): Risk of head

injuries.
There must be sufficient space for the tallest opera-

tor not to hit their head on the bottom part of the roof.

Use

Ergonomic dimensions

113

45878043344 EN - 11/2021 - 12

Содержание LTX 50































































































































































































































































































Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды

Still LTX 50, Оригинальное руководство пользователя

Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды