Still LTX 50 Скачать руководство пользователя страница 32

Страница: 32 / 286

Safety tests

Regular safety inspection of the

truck

Safety inspection based on time and ex-

traordinary incidents

The operating company must ensure that the

truck is checked at least once a year, or fol-

lowing noteworthy incidents.
As part of this inspection, a complete check of

the technical condition of the truck must be

performed with regard to accident safety. In

addition, the truck must be thoroughly

checked for damage that could potentially

have been caused by improper use. A test log

must be created. The results from the inspec-

tion must be retained until a further two in-

spections have been carried out.
The inspection date is indicated by an adhe-

sive label on the truck.

–

Arrange for the service centre to perform

periodic safety inspections on the truck.

–

Observe guidelines for checks carried out

on the truck in accordance with FEM 4.004.

The operator is responsible for ensuring any

defects are remedied without delay.

–

Contact your service centre.

NOTE

Observe the national regulations for your

country!

Regelmäßige Prüfung

(FEM 4.004)

nach nationalen Vorschriften
basierend auf den EG-Richtlinien:
95/63/EG, 99/92/EG, 2001/45/EG

Die Prüfplakette ersetzt nicht das Prüfprotokoll

Nächste Prüfung

56344391019

Mitglied der:
Fédération
Européene
de la Manutention

STILL GmbH Hamburg

0000_003-001_V3



Safety

Safety tests

45878043344 EN - 11/2021 - 12

Содержание LTX 50































































































































































































































































































Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды

Still LTX 50, Оригинальное руководство пользователя

Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды