Still LTX 50 Скачать руководство пользователя страница 137

Страница: 137 / 286

Driving using the steering wheel controls (optional feature) with the

operator on the ground alongside the truck

Precautions for use

2409

2410

DANGER

Risk of injury (see labels 1 and 2)
With both feet on the ground, push the travel con-

trols, keeping both your feet and your body at a safe

distance from the edge of the truck to avoid crushing

your feet or bumping your body against the moving

truck.
When using the controls, the operator must walk

alongside the truck. It is strictly prohibited to use the

controls when you are in front of or behind the truck.

In any case, it is strictly prohibited to use the controls

in a different way than the way described.

Indicator lights (F1) and (F2)

2392

●

The indicator lights (F1) and (F2) are off

when driving with the operator on board the

truck

●

The indicator lights (F1) and (F2) flash

when the truck is switched on but the oper-

ator is not in the driver's compartment on

board the truck (operator platform disabled)

NOTE

When (F1) and (F2) flash, this indicates that

the steering wheel travel controls are enabled

for pedestrian mode operation. Be careful not

to activate the steering wheel travel controls

unintentionally.

Travel controls

2538

●

When the travel controls are turned in direc-

tion (A), the truck travels forward

●

When the travel controls are turned in direc-

tion (B), the truck travels backwards

Use

Drive modes and positions

127

45878043344 EN - 11/2021 - 12

Содержание LTX 50































































































































































































































































































Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды

Still LTX 50, Оригинальное руководство пользователя

Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды