Still LTX 50 Скачать руководство пользователя страница 193

Страница: 193 / 286

Electrically controlled LiftRunner system (where present)

CAUTION

Only use suitable trailers that have been authorised

by the truck manufacturer.
Strictly adhere to the instructions provided by the

trailer manufacturer.

The Liftrunner system is optional. This system

allows the operator to lift and lower the trailer

after adequately connecting the trailer to the

tow tractor.

DANGER

Risk of crushing the trailer and of the operator fall-

ing.
Climbing and walking on the trailers is forbidden.

Connecting the trailer to the LiftRunner

system

–

Park the tow tractor safely on a flat surface.

–

Turn off the truck.

–

Climb down from the tow tractor and con-

nect the socket and plug for LiftRunner that

are used to connect the truck to the trailers.

Information about the power socket for Lif-

tRunner present on the truck:

●

85 A for power contacts and 14.5 A for con-

trol contacts.

Operation

Lifting and lowering the trailers AUTOMATI-

CALLY

●

When the operator climbs onto the operator

platform, the system automatically lifts the

trailers

●

When the operator climbs down from the

operator platform, the system automatically

lowers the trailers

DANGER

Risk of crushing feet of others when the trailers are

lowered
In the version with AUTOMATIC lowering of trailers,

the operator must make sure that there are no peo-

ple near the trailer before leaving the truck.

Use

LiftRunner (optional)

183

45878043344 EN - 11/2021 - 12

Содержание LTX 50































































































































































































































































































Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды

Still LTX 50, Оригинальное руководство пользователя

Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды