Still LTX 50 Скачать руководство пользователя страница 111

Страница: 111 / 286

path in front. Travel in the opposite direction

when transporting goods that impair visibility.

WARNING

Driving while seated is allowed only in the correct po-

sition on the relevant optional seat (where present)
Driving the truck while sitting on any other part of the

truck is forbidden

Please remember the following:

●

Drive the truck in the correct position as de-

scribed in the following sections.

●

The truck must not be used as a stepladder.

●

The truck has not been designed to trans-

port anyone other than the operator and

must not be used for this purpose.

●

The operator must always stay close to the

truck.

●

Stay in the safety area (working area de-

fined by the manufacturer).

●

Pay attention to protruding objects (e.g. on

shelves)

NOTE

Using a telephone or radio in the truck is per-

mitted, but avoid using these devices when

driving as they may distract you.
While driving, it is forbidden to:

●

Stick out your arms and legs

●

Lean outside the edge of the truck

●

Move from one truck to another or from the

truck to stationary structures (shelving, etc.)

Specific risks: for trucks equipped with

forks only

DANGER

Risk of injury! There is a risk of physical injury in-

side the danger area. Danger of death from falling

loads!
Do not stand on the forks! (where present)
Stopping or walking under the forks is strictly forbid-

den, even when they are not loaded!

Use

Authorised and safe use

101

45878043344 EN - 11/2021 - 12

Содержание LTX 50































































































































































































































































































Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды

Still LTX 50, Оригинальное руководство пользователя

Результаты поиска

Содержание LTX 50

Отзывы:

Похожие инструкции для LTX 50

Бренды по названию

Популярные бренды