manualshive.com logo in svg

Stanley QB Expert, Инструкция по эксплуатации


Поделиться
Скачать
background image

ANALYZE Area

QB Expert Alpha Controller

84

The details provide the Date and Time the event occurred.
Source – Shows where the user changed the values.  Controller means the keypad was used, aTB means the Alpha 
Toolbox was used.
Details – Shows which part of the controller the changes were made.
Press the BACK interactive menu button to return the LOG screen.
Press the MANAGE interactive menu button to export Log Data to the USB memory stick or to clear the event log.
Connect a USB memory stick to the USB port on the bottom of the Alpha controller. Use the up/down arrows and/
or the numeric keypad to select option.

Use the up/down arrows and/or the numeric keypad to type a file name. Pressing the OK interactive menu button 
saves the data to the USB memory stick. 

After the file is saved, press the OK button to return to the LOG screen.
Press the MANAGE interactive menu button to clear the data.
Press OK to clear the data or press CANCEL to return to the LOG screen.

Press YES to clear the data, NO to return to the LOG screen.
Use the right arrow to move to the next tab or press EXIT to save the changes and return to the Run screen. See 
section “3.1.2.6 Exit” on page 52.

3.3.5  I/O Tab

This tab indicates the real time status of the 24V DC Inputs and Outputs. Forcing the I/O on or off is also performed 
here. Users must have DIAGNOSTICS or ADMINISTRATOR access level to force I/O.

Each 24V DC connector pin is represented. Pin A is for supplying 24V DC to the I/O functions. Pin V is the 
24VDC Return to complete the current loop. Pin B is the bus for the Outputs. See section “6.11 Input and Output 
Connector” on page 116 for a schematic. Pins L through U are for Inputs. Pins C through K are for Outputs. See 
section “3.1.4.3 I/O Tab” on page 69 to assign functions to the pins.

Содержание QB Expert























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для QB Expert

Samson 3253 Translation Of Original Instructions preview
3253
Бренд: Samson Страницы: 92
Jafar 2901 Operation And Maintenance Manual preview
2901
Бренд: Jafar Страницы: 10
CAME G5000 Installation, Operation And Maintenance Manual preview
G5000
Бренд: CAME Страницы: 32
Babybee Prams Comet Instruction Manual preview
Comet
Бренд: Babybee Prams Страницы: 21
Eaton PKE-COM-RTU Instruction Leaflet preview
PKE-COM-RTU
Бренд: Eaton Страницы: 2
Eaton i-on30R Installation Instructions preview
i-on30R
Бренд: Eaton Страницы: 2
Eaton MEMSHIELD 4 Installation Instructions Manual preview
MEMSHIELD 4
Бренд: Eaton Страницы: 8
Samson 3372 User Manual preview
3372
Бренд: Samson Страницы: 8
Samson 3249 Mounting And Operating Instructions preview
3249
Бренд: Samson Страницы: 60
Samson 2405 Series Mounting And Operating Instruction preview
2405 Series
Бренд: Samson Страницы: 40
ValvTechnologies V1 Series Installation And Operations Maintenance Manual preview
V1 Series
Бренд: ValvTechnologies Страницы: 20
U-Tron 6830-122-C10 Instruction Manual preview
6830-122-C10
Бренд: U-Tron Страницы: 8
Agilent Technologies G8600-68001 Field Installation Instructions preview
G8600-68001
Бренд: Agilent Technologies Страницы: 20
ICP DAS USA ECAT-2061 Quick Start preview
ECAT-2061
Бренд: ICP DAS USA Страницы: 4
ProSoft Technology InRAX MVI46-PDPS Manual preview
InRAX MVI46-PDPS
Бренд: ProSoft Technology Страницы: 72
SAFERA PCU6.1-F User And Installation Manual preview
PCU6.1-F
Бренд: SAFERA Страницы: 32
National Instruments NI 9852 Getting Started Manual preview
NI 9852
Бренд: National Instruments Страницы: 26
ATT Holding Kade KZ-700-U/H Installation Manual preview
Kade KZ-700-U/H
Бренд: ATT Holding Страницы: 12

Бренды по названию

Популярные бренды

Загрузить еще бренды