Stanley QB Expert, Инструкция по эксплуатации

Страница: 17 / 214

Introduction
Instruction Manual
9
WARNING
Continued:
e.) Do not overreach. Keep proper footing and balance at all times. This enables better control
fo the power tool in unexpected situations.
f.) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from moving parts. Loose clothes jewellery or long hair can be caught in moving
parts.
g.) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used.
Use of dust collecton can reduce dust-related
hazards.
4. Power Too Use and Care
a.) Do not force the power tool. Use the correct power tool for your application. The correct
power tool will do the job better and safer at the rate for which it was designed.
b.) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c.) Disconnect the plug from the power source and/ or the batatery pack from the power
tool before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d.) Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e.) Maintain power tools. Chek for misalignment or binding of moving parts, breakage of
parts and any other condition that may affect the power tool’s operation. If damaged,
have the power tool repaired before use.
Many accidents are caused by poorly maintained
power tools.
f.) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g.) Use the power tool, accessories and tool bits etc. in accordance with these instructions,
taking into account the working conditions and the work to be performed.
Use of the power
tool for operations different from those intended could result in a hazardous situation.
5. Service
a.) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.