Stanley QB Expert, Инструкция по эксплуатации

Страница: 49 / 214

Programming
Instruction Manual
41
Export
Writes all Jobs and their parameters to a Job file on the USB memory stick.
Use the following sequence to save a Jobs file.
Use the down arrow to select the Name field. Use the Toggle button to enter edit mode.
Use the left arrow to delete the name. Use the up/down arrows or the numeric keypad to
write a new file name. Press the interactive OK button or the Toggle button to accept the
file name. Press again to save the file to the USB memory stick.
Press the interactive OK button to acknowledge the save.
Press the EXIT interactive menu button to save changes and return to the Run screen. See section “3.1.2.6 Exit”
on page 52
3.1.2.2 Task Button
Press the TASK interactive menu button to setup the parameters of the Tasks and Step(s) inside the selected Job.
Task settings apply to all Steps inside the Task. The maximum number of Tasks in the Expert Alpha controller is
255. Share these Tasks between the programmed Jobs. There can be up to 99 Tasks per Job.
Select Tasks by pressing the TASK interactive menu button. Use the left/right arrow keys to select the tab/Task
for modifying.
Name
Name the Task to define the operation performed (15 character maximum). Use the up/
down arrows for letters or use the numeric keypad.
Batch Count
This is the number of OK fastening cycles the Task is required to count before it is
completed OK. Zero is not allowed. The default value is 1. The maximum is 99.