Stange SE-707 Скачать руководство пользователя страница 8

Страница: 8 / 244

Program Controller SE-707

Subject to technical modifications

2 Safety

This section gives an overview of all important safety aspects for an optimal protection of the personnel as well as safe and

trouble free operation of the device.

Additionally the individual chapters contain concrete safety references, marked by symbols, for the prevention of direct

dangers. Beyond those pictograms, signboards and markings are present at the device, which have to be kept in constantly

readable condition.

2.1 Intended use

The industrial control exclusively serves for the control of machines and plants, which are build according to the applicable

regulations and equipped with all necessary safety installations.

The operational reliability is ensured only by the intended use of the device.

ATTENTION !

Each use of the device going beyond the intended use and/or different use is forbidden and is

considered as not intended. In particular the use of the device for the control or as replacement of

safeguarding equipment in the sense of the machine directive (98137 EG) is not permitted.

Requirements of any kind against the manufacturer and/or its authorized persons because of damage

on the basis of not intended use of the device are excluded.

For all damages on the basis of not intended use the operator is responsible alone.

Among the intended use also the correct adherence of the operating ranges as well as the installation-,

operation- and cleaning instructions.

2.2 Electromagnetic compatibility (EMC)

Before installing an EMC planning is necessary, even though devices fulfil the EMC requirements. Disturbance sources

(galvanic, inductive and capacitive coupling) as well as radiation coupling come to consideration thereby.

2.3 EMC safeguarding

The following requirements should be kept, in order to safeguard EMC:

•

Inactive metal parts must have a correct and extensive grounding.

•

Wires and devices have a correct shielding.

•

Wiring and line run must be executed correctly.

•

The electric equipment is grounded and has a uniform reference potential.

•

Special applications need specific EMC measures.

Содержание SE-707





















































































































































































































































Результаты поиска

Содержание SE-707

Отзывы:

Бренды по названию

Популярные бренды

Stange SE-707, Руководство по эксплуатации

Результаты поиска

Содержание SE-707

Отзывы:

Бренды по названию

Популярные бренды