Stange SE-707 Скачать руководство пользователя страница 62

Страница: 62 / 244

Program Controller SE-707

Subject to technical modifications

8.2.3 Programming segments

Programming the SE-707 takes place segment wise; each segment

is defined by a process step and the segment time which is valid

for all set values and digital tracks. New segments are always

inserted below the actual marked segments in the column

“Segments”. A process step from the list must be selected before

the segment is inserted. Next the segment time should be adapted

(select line with time (red marked) and operate “Edit”). It is only

not possible to change segment time for segment “00”.

The content of the segment can be copied to another already

available segment via “Copy” button.

The actual marked segment in the column “Segments” can be

deleted via “Delete” button.

Note

Locking of digital tracks among each other defined in the configuration is here considered, i.e. tracks locked among each

other cannot be switched on at the same time.

Definitions made in the configuration for digital tracks and set values (free/off/on/take over and/or free/locked) are here

considered, too.

One process step is assigned to each segment. Set values and

digital tracks were already exactly defined in the configuration;

they have received a designation there and a release of the

necessary digital tracks and set values was approved. Select the

desired set values and/or tracks (red highlighted), in order to

define the corresponding values and/or conditions. Operate the

“Edit” button therefor and adapt the parameter and/or condition.

The following parameters are displayed:

Left screen side:

- Segment number

- Segment step name

- Segment time

Table:

- Process step / set value / track No.

- Value / state

- Dimension

8.2.4 Copy programs

The desired program must be selected (blue highlighted) in order to copy a program.

Operate the “Copy” button thereafter and the program is copied with a new program number after a security query.

Содержание SE-707





















































































































































































































































Результаты поиска

Содержание SE-707

Отзывы:

Бренды по названию

Популярные бренды

Stange SE-707, Руководство по эксплуатации

Результаты поиска

Содержание SE-707

Отзывы:

Бренды по названию

Популярные бренды